[rp-ml] LOM1015 servicing, materials, maintenance & possible repairs or ugrades Work x

From: Stamatis Polydoras <polsntua_at_central.ntua.gr>
Date: Thu, 17 Jan 2013 09:28:01 +0200

Hallo everyone,

I would like to ask the community if there is still anyone out there
(except for Mr. M. Feygin, whom I have already contacted) who could
still support an old but working Europe-based LOM machine like our
LOM1015 (Old plotter not the 1015+ model), in any one of the following
ways:
1. Provide LOM paper rolls (LPH042 or similar)
2. Provide and install spare parts for the machine (e.g. mirrors,
graphite bearings, switches) for preventive maintenance or repair reasons.
3. Perform overall maintenance of the machine.
4. IMPORTANT! Can upgrade/replace the old LOM PC with a new one (This
would require new or adapted Galil & laser boards to work with the new
PC), or has successfully attempted such a task.

Europe-based companies or individuals would be much easier to assist if
there are any.
I would very much appreciate your experience, knowledge and contacts
regarding these matters.

Sincerely,

Stamatis Polydoras
ME
RP Laboratory, NTUA
Athens, GREECE
Received on Thu Jan 17 2013 - 09:23:43 EET

This archive was generated by hypermail 2.3.0 : Tue Feb 13 2018 - 12:38:45 EET