From olaf.diegel at design.lth.se Sat Sep 15 10:15:21 2018
From: olaf.diegel at design.lth.se (Olaf Diegel)
Date: Sat, 15 Sep 2018 07:15:21 +0000
Subject: [rp-ml] Need alternative metal powder sources
Message-ID: <7c5b3924b3554122967b6bc3d14c2200@design.lth.se>
Greetings All,
I have a 3D Systems DMP 320 metal AM system, and am looking for alternative sources of metal powders that are compatible with the system. In particular, I am currently after AlSi10Mg powder, but will also later be after other powders.
If anyone knows of a good source for such powder, the information would be greatly appreciated.
Alternatively, if any one happens to know the powder particle size distribution for the DMP320 machines (for aluminium powder, my guess is either in the 15-45um or 20-63um range (I know the filter size on the sieve is 80 microns)), that would be helpful too.
All the best
Olaf
Olaf Diegel
Professor of Product Development
School of Engineering, Department of Design Sciences
[Description: Lunds_universitet_C2r_CMYK]
Box 118, 221 00 Lund
Physical address IKDC Design Centre, S?lvegatan 26, Lund 22362, Sweden
Telephone +46-46-222 15 56
olaf.diegel at design.lth.se
www.product.lth.se
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 2969 bytes
Desc: image001.gif
URL:
From adler at a3dm.com Sat Sep 15 15:35:21 2018
From: adler at a3dm.com (Steven Adler (A3DM))
Date: Sat, 15 Sep 2018 12:35:21 +0000
Subject: [rp-ml] Need alternative metal powder sources
In-Reply-To: <7c5b3924b3554122967b6bc3d14c2200@design.lth.se>
References: <7c5b3924b3554122967b6bc3d14c2200@design.lth.se>
Message-ID: <184E334C-9CFB-4E91-A655-6FF62BF108D2@a3dm.com>
Olaf
Tekna Advanced Materials has what you are looking for
Offices in Macon, France and Headquartered in Sherbrooke Quebec
Contacts are attached
Steven Adler
Mobile 503-250-3324
On Sep 15, 2018, at 2:16 AM, Olaf Diegel > wrote:
Greetings All,
I have a 3D Systems DMP 320 metal AM system, and am looking for alternative sources of metal powders that are compatible with the system. In particular, I am currently after AlSi10Mg powder, but will also later be after other powders.
If anyone knows of a good source for such powder, the information would be greatly appreciated.
Alternatively, if any one happens to know the powder particle size distribution for the DMP320 machines (for aluminium powder, my guess is either in the 15-45um or 20-63um range (I know the filter size on the sieve is 80 microns)), that would be helpful too.
All the best
Olaf
Olaf Diegel
Professor of Product Development
School of Engineering, Department of Design Sciences
Box 118, 221 00 Lund
Physical address IKDC Design Centre, S?lvegatan 26, Lund 22362, Sweden
Telephone +46-46-222 15 56
olaf.diegel at design.lth.se
www.product.lth.se
_______________________________________________
rp-ml mailing list
rp-ml at rp-ml.org
http://rapid.rp-ml.org/mailman/listinfo/rp-ml
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 2969 bytes
Desc: image001.gif
URL:
From Remy.Pontone at tekna.com Sat Sep 15 16:08:41 2018
From: Remy.Pontone at tekna.com (=?iso-8859-1?Q?R=E9my_Pontone?=)
Date: Sat, 15 Sep 2018 13:08:41 +0000
Subject: [rp-ml] Need alternative metal powder sources
In-Reply-To: <184E334C-9CFB-4E91-A655-6FF62BF108D2@a3dm.com>
References: <7c5b3924b3554122967b6bc3d14c2200@design.lth.se>
<184E334C-9CFB-4E91-A655-6FF62BF108D2@a3dm.com>
Message-ID:
Dear Olaf,
Thanks for your email.
We do sell usually 2 sizes for customers having PROX 320 machines :
5-25 microns or 20-63 microns.
Our Technical Sales Engineer, Mr Thibault Azam, will contact you on Monday with all necessary technical informations.
In case you would need more informations or support please feel free to contact us any time.
Best regards,
R?my
R?my Pontone
Vice President Sales & Marketing - Group
Product Line Director - Materials
Managing Director - Tekna Plasma Europe
email: remy.pontone at tekna.com
T?l?phone : +33(0)3 85 23 91 37
Cell. : +33(0)6 70 05 97 95
Web Site : www.tekna.com
[cid:image002.png at 01D2E682.9C9FC8E0]
200 boulevard de la R?sistance * 71000 M?con * France
AVIS DE CONFIDENTIALIT? Ce message est ? l'usage exclusif de son destinataire et peut contenir des renseignements confidentiels et/ou privil?gi?s. Si vous n'?tes pas le destinataire vis?, veuillez nous en informer imm?diatement et d?truire ce message et toute pi?ce jointe, sans en garder de copie. La divulgation, la reproduction, la distribution ou toute autre action relative au contenu du message est strictement interdite. Nous n'assumons aucune responsabilit? pour l'interception de toute communication par Internet ou la transmission de virus informatiques.
NOTICE OF CONFIDENTIALITY This message is for the exclusive use of its recipient and may contain confidential and/or privileged information. If you are not the intended recipient, please notify us immediately and destroy this message and any attachment, without retaining a copy. Disclosure, copy, distribution or any action concerning the content of this message is strictly prohibited. We assume no liability for the interception of any communication via the Internet or the transmission of computer viruses.
De : Steven Adler (A3DM) [mailto:adler at a3dm.com]
Envoy? : samedi 15 septembre 2018 14:35
? : Rapid Prototyping Mailing List
Cc : J?r?me Pollak ; R?my Pontone
Objet : Re: [rp-ml] Need alternative metal powder sources
Olaf
Tekna Advanced Materials has what you are looking for
Offices in Macon, France and Headquartered in Sherbrooke Quebec
Contacts are attached
Steven Adler
Mobile 503-250-3324
On Sep 15, 2018, at 2:16 AM, Olaf Diegel > wrote:
Greetings All,
I have a 3D Systems DMP 320 metal AM system, and am looking for alternative sources of metal powders that are compatible with the system. In particular, I am currently after AlSi10Mg powder, but will also later be after other powders.
If anyone knows of a good source for such powder, the information would be greatly appreciated.
Alternatively, if any one happens to know the powder particle size distribution for the DMP320 machines (for aluminium powder, my guess is either in the 15-45um or 20-63um range (I know the filter size on the sieve is 80 microns)), that would be helpful too.
All the best
Olaf
Olaf Diegel
Professor of Product Development
School of Engineering, Department of Design Sciences
Box 118, 221 00 Lund
Physical address IKDC Design Centre, S?lvegatan 26, Lund 22362, Sweden
Telephone +46-46-222 15 56
olaf.diegel at design.lth.se
www.product.lth.se
_______________________________________________
rp-ml mailing list
rp-ml at rp-ml.org
http://rapid.rp-ml.org/mailman/listinfo/rp-ml
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 6000 bytes
Desc: image001.png
URL: