RE: Zephyr Recoater on SLA

Date: Fri Jun 21 1996 - 19:39:26 EEST

Attachment is corrupted! Please re send uuncode format.

At 08:37 AM 6/21/96 -0500, you wrote:
> Dan wrote:
>Steve / Kamesh,
>We have received our zephyr upgrade for our SLA500 and have been told by
>3DSystems field service to delay the installation until "bug fixes" are
>implemented into the software. ......................
>Have you heard any details that might correlate your crashes to software
>bugs? Thanks.
>Dan Sammons
>Design Prototyping Technologies
>315-434-1869 voice
>No. We haven't heard anything that relate these mysterious crashes to the
software. Personally, I would like to go back to 1.7.4. Now we have the
zephyr installed on our second 500 also. This was about a week ago. We
retained 1.7.4 on this machine intentionally. (BTW, on the other 500 we
have 1.8) Until now we haven't experienced any crashes on this machine. I
guess we need to wait for another week or so to confirm if it is anything to
do with the software.
>In the meantime, as suggested by Steve, we are getting our eprom checked .
Thank you Steve for your input.
>Attachment Converted: C:\EUDORA\DOCUME~1\RE Zephyr Recoater on SLA
Reginald Ponder
Laboratory Manager
Rapid Prototyping & Manufacturing Institute
Georgia Institute of Technology
Manufacturing Research Center
813 Ferst Drive
Atlanta, GA 30332-0406

404.894.7688 telephone
404.853.7689 fax

This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:37:25 EEST