Re: CAM from STL

Date: Sat May 24 1997 - 01:07:39 EEST

 The free STL TOOLBOX program at will read an
STL file and write an IGES surface file that can be read by most CAM
programs. This has been tested with CAMAX software, and one caveat would be
that a LOT of surfaces are for every triangle.
 Note: This program has hefty memory requirements and needs a good Pentium
or better to run.

This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:39:38 EEST