0.3 mm too high Z build

From: Andrzejewski, Jan (jan_andrzejewski@peragroup.com)
Date: Thu Feb 12 1998 - 14:55:00 EET

Joost Mikkers 0.3 mm too high SLA models

The Z height problem is a function of the 'hatch overcure' and 'print
through' it can be reduced by adjusting the hatch overcure and skin fill
cure depth parameters . These can cause other problems if you choose the
wrong values.

A simpler way is to use Zslice in your Maestro slice options ( Auto Z
correct, ON, 2 layers ).

Jan Andrzejewski
RP Operations Manager

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:44:55 EEST