The ModelMaker II machine by Sanders Prototype is accurate to
0.013mm in the Z axis and 0.025mm in the X/Y axis, with a
minimum wall thickness of 0.1mm. For more information, see
our web page at www.sanders-prototype.com.
Pedro Garayo wrote:
> Dear rpmlers,
> Are there any systems able to obtain an accuracy of 0,07 mm. or
> Is it SLS(using PA11) the most suitable for prototypes to be used in
> (The part fits in 250x100x40 mm. and it is 1.5 mm. thick)
> Thank you very much.
> Pedro Garayo
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:45:06 EEST