We use laser cutters to perform these tasks in paper, card stock, and acrylic
Check us out at: http://coleman-associates.com
"William D. Richards" wrote:
> At 2:27 AM -0600 1999/07/03, Michael Rees wrote:
> >Hello list,
> >does anyone have info about the following?
> >Are their sign cutters that will take matt board? I'm exploring ways
> >that a model can be sliced up and fit together with slot cuts. Any info,
> >speculation, is welcome.
> >michael rees http://www.sound.net/~zedand00/
> >1212 w 8th St. 816 753 3020 voice firstname.lastname@example.org
> >KC, Mo 64101 816 753 1542 fax (0=zero)
> >For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
> I don't see how this could off-topic. Defining Rapid Prototyping as
> generating a physical part from a CAD file, this seems to fall into the RP
> In an earlier letter, I mentioned how I had some models that were
> unbuildable. Actually, two of them did have solutions. In one, the only way
> was to break the 3D solid model into pieces using CAD software, create RP
> tools based on each seperate piece, shoot wax into the tools and then push
> the resulting wax patterns together.
> I've even created a couple of models by having my favorite CAD program
> unfold the model, and then print the resulting pattern onto paper. A pair
> of scissors, a few hours, and rather cramped hands later, I had a model
> created out of paper.
> Carpenters use tongue and groove joints to create furniture, why couldn't
> we do that with a RP pattern?
> The trick, Mike, is to get the pieces to align correctly. There are a
> number of techniques to do this, you just have to use your imagination.
> Though I guess I could say that you should consider the end use of the
> pattern in determining the technique you use to connect the sections.
> You know, it just occurred to me that using RP would be a terrific way to
> create some of those wild 3D puzzles that companies make...
> Bill Richards
> /| Virtual Concepts Design ...Where the Virtual |
> | | Becomes REAL! |
> | | 696 Paine Rd. |
> | | North Attleborough, MA 02760 |
> | | Phone/Fax:(508) 695-0534 |
> | | e-mail: email@example.com http://www.virtcon.com |
> | !_____________________________________________________!
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:52:12 EEST