That is exactly right. You can communicate with the controller to determine the x,y,z, offset. I do not use FDMCOM but I can tell you how to do it otherwise.
If you are using UNIX simply execute the command ssrun to communicate with the controller.
If you are using NT you will have to establish a "hyperterminal conection".
Instructions on how to do so are in QS5.0 or later release notes.
Basically what you need to do is setup your hyperterminal program with the following comm port settings:
Bits per second: 9600
Data Bits: 7
Stop Bit: 1
flow control: Xon/Xoff
Local Echo: On
Once you have configured these settings for your hyperterminal program simply click on the 201.ht file in the "QSinstall"\gifts directory.
Then if you reference your FDM Manual under the utilities section look up the ssrun command. You will find Options/Parameters for communication with the 201 controler.
notice 121, 122, 123 reference tip offset variables.
If while you have a hyperterminal connection you type "ov121;" the hyperterminal will output the tip offset variable for x. "ov122;" will output tip offset variable for y and "ov123;" will output tip offset variable for z.
Store the output for all three and when you put that head back in place use the following commands:
"vs121,output;" where output = the result of the "ov121;" command
"vs122,output;" where output = the result of the "ov122;" command
"vs123,output;" where output = the result of the "ov123;" command
I would then run a cal box to make sure you seated the head exactly as it was before you took it off.
Hope this helps.
Brad Van Dike
Yazaki North America
>>> <firstname.lastname@example.org> 03/24/00 02:55AM >>>
Please tell me more!!! Can you talk with the controller to determine the
That would be great!
I tried to do this with FDMCOM Mantra (as gifted on the Quickslice CD) but I
got a lot of trouble.
Please learn me the tricks!
Martin Dekkers e-mail: email@example.com
TNO Industrie tel: ++ 31 15 260 88 47
Oostsingel 209 fax: ++ 31 15 260 87 25
2600 GB Delft
> -----Oorspronkelijk bericht-----
> Van: Bradley Van Dike [SMTP:firstname.lastname@example.org]
> Verzonden: donderdag 23 maart 2000 19:49
> Aan: email@example.com
> Onderwerp: Re: improving the FDM support calibration
> I think I can save a lot of calibration work for you. I am a former
> Stratasys applications Engineer. When I was with Stratasys I had to build
> parts out of elastomer and then abs...as you had said changing heads every
> There is a way to determine the x,y,and z offset position, and if you
> record this position before you change heads you can plug it back in when
> you go back to that head. If you are interested in this method please
> contact me and I would be more then happy to help you out.
> Brad Van Dike
> Yazaki North America
> >>> <firstname.lastname@example.org> 03/23/00 11:46AM >>>
> Dear FDM users,
> At TNO we use tips 10 and 12 for ABS and another head for Elastomer
> sequentially. This means a lot of calibrating work.
> TNO stands for the Netherlands Organization for Applied Scientific
> I would like to know how many people will be interested in joining us to
> a small research to have the calibration method improved.
> With calibrating I mean both the X-, Y- and Z-offset AND the flow of
> and Supportmaterial. These 5 parameters should be set pretty precise to
> the most out of your FDM-machine (1600, 1650, 2000, 3000 models). Also,
> a perfect calibrating, the peeling away of supportstructures is a lot
> easier, having your models nicer and quicker.
> I even think you won't need WaterWorks in 99% of the cases, if you have a
> perfect calibration.
> Well, if you are interested in having the calibration method improved,
> please give me a reaction.
> Kind regards, Martin
> Martin Dekkers e-mail: email@example.com
> Prototyping Engineer
> TNO Industrie tel: ++ 31 15 260 88 47
> Oostsingel 209 fax: ++ 31 15 260 87 25
> Postbus 5073
> 2600 GB Delft
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:07 EEST