Re: SLS part shifting

From: Vern Carter (
Date: Fri Jun 09 2000 - 00:55:46 EEST


We have seen the same problem on our 2000 but ours is intermittent. It seems
to shift for about an inch then it will shift back. On a 12" build we have
seen as many as four occurrences. of this happening. I was told that the
galvos are sticking but I never got a definitive answer or solution to fix
the problem. I would be interested to know what you find out.

Vern Carter

-----Original Message-----
From: Drew Brown <>
To: RPML <>
Date: Thursday, June 08, 2000 8:54 AM
Subject: SLS part shifting

>Recently we have experienced part shifting on one of our Sinterstations.
>It appears that every few inches in the Z direction we see a small X-Y
>shift in the part. Has anyone had this experience and what corrective
>measures were taken?
>Thanks in advance.
>Drew Brown
>Conceptual Reality L.L.C.
>For more information about the rp-ml, see

For more information about the rp-ml, see

This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:38 EEST