RE: ProE-problem

From: Julian Brett (
Date: Wed Jan 17 2001 - 11:18:25 EET

If you are a Pro-E user it might be worth joining the Pro-E news group:
I use SolidWorks and when I have a problem I turn to the SolidWorks news
group for help and I've always solved the problem with their help.
Hope this helps you and good luck.
Julian Brett
University of East London
Research (RP&M)
Product Design
4-6 University Way
London E16 2RD
-----Original Message-----
From: []On Behalf Of
Ola L.A. Harrysson
Sent: 17 January 2001 05:00
Subject: ProE-problem

Dear List,

I have some CAD-related problems with ProE and I hope one of you will be
able to help me or point me in the right direction. I have created
iges-curves in Mimics based on CT-data and I am trying to create a solid
3D-model in ProE through blending. When I export the curves from Mimics,
they are all of the same type and with the same number of control points,
which is needed by ProE. When I import the iges-file into ProE, I get all
curves in the right location but when I try to use them for blending, the
number of control points have changed so it is no longer possible to use the
blend command. I know there is suppose to be an other way of doing this but
I don't know how. If any of you have any experience with this or knows what
I am talking about, please let me know.

Ola Harrysson
Ph.D. Candidate
Industrial Engineering
University of Central Florida
Orlando, Florida, USA

For more information about the rp-ml, see

For more information about the rp-ml, see

This archive was generated by hypermail 2.1.2 : Fri Jan 04 2002 - 09:56:43 EET