Do you have this as a solid/surfaced CAD file? If so, scan the part and use
Paraform's inspection module to compare the scanned dataset to the nominal
CAD. The inspection software will output a color map showing all tolerance
deviations. Instead of inspecting a few points, you can inspect ALL the
Jason L. Dickman
VP Lab Operations
Shared Replicators, Inc.
3638 South Memorial Dr.
Tulsa, OK USA
From: firstname.lastname@example.org [mailto:email@example.com]On Behalf Of
Impact - Doug Johnson
Sent: Tuesday, January 23, 2001 12:45 PM
To: RP Mailing List
Subject: Inspection of parts...
Here is what I am looking for help with:
I have a part that has a spline on it.
I need to check the profile of the spline to make sure it is within
We have been unable to do this with a standard CMM.
Is there a video inspection system that can use a visual go/no go gauge?
We don't have time to make a physical go/no go.
Doug Johnson – Prototyping Program Manager
IMPACT Engineering Solutions
3315 North 124th Street
Brookfield, WI 53005
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Fri Jan 04 2002 - 09:56:44 EET