Our report "LASER SYNTHESIS OF THE FUNCTIONAL GRADED FILTER ELEMENTS FROM
METAL-POLYMER POWDER COMPOSITIONS" at LANE 2001 Conference, August 28-31,
2001, Erlangen, GERMANY http://www.lft.uni-erlangen.de/SEITEN/LANE/2001/
was devoted SLS of the FG filter elements from the nickel-polymer and
bronze-polymer powder compositions.
Dr. Igor Shishkovsky
Ass. Prof. of Samara State Technical University
& Senior Researcher of Lebedev Physical Institute of
Russian Academy of Science, Samara branch.
----- Original Message -----
From: "Geir Gumundsson" <firstname.lastname@example.org>
Sent: Tuesday, September 04, 2001 3:26 PM
Subject: SLS of highly porous metal part (filter) ?
> Dear list
> Do you know if it is possible to use selective laser sintering
> to make porous part in bronze or any other metal, which
> have similar properties as filters and silencers made with
> the gravity sintering method? Does anyone of you have
> any experience in making such parts? Do you know of
> any service bureau who could make such a part?
> In this case we would like to use powder that are coarser
> than is normally used in SLS and the layers would therefore
> be thicker.
> Best regards,
> Mr. Geir Gudmundsson
> Project Manager - Production and Automation
> Materials and Environmental Department
> IceTec (Technological Inst. of Iceland)
> 112 ReykjavÝk
> Tel: (+354) 570 7100; Direct: (+354) 570 7192
> Mobile: (+354) 899 1832; Fax: (+354) 570 7111
> For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Fri Jan 04 2002 - 09:57:44 EET