From: Product Development Center (firstname.lastname@example.org)
Date: Tue Jan 22 2002 - 00:16:12 EET
We are looking for a very high resolution 3D scanner.
The requirements are the following:
-Part size: about 10"*8"*8" (somewhat bigger than a football).
-Scan Speed: as fast as possible, and not to exceed 1 min.
-Resolution: as high as possible (15 microns or less).
We are especially interested in looking at the surface texture of the
I know those are high requirements, but the bit of good news is
PRICE is not an issue.
I will appreciate any answer on the subject.
Philippe Guerit Research Engineer SRI International 333 Ravenswood Ave Menlo Park, CA 94025
Tel: 650-859-2179 Fax: 650-859-2316
_________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:13:22 EET