From: Somatech, Bart Mol (email@example.com)
Date: Fri Feb 22 2002 - 14:52:18 EET
Stepdowns of 0.012" are not available. It has 2 resolutions; Draft mode
(0.013" or 0.033 mm and Standard mode - layer thickness is then 0.010 inches
or 0.254 mm. I have seen parts, they are equally good as what Prodigy
builds (at same slice thickness of course).
It is correct that the extrusion nozzle diameter is 0.012"
Support system is of the Stratasys BASS (break away support system) type,
which is also used for all the other FDM systems. It is only difficult for
very complex parts - where you do not good access with hands or tools.
With kind regards,
Product Manager Stratasys
Somatech Applicaties B.V.
3905 PG Veenendaal
Tel. : +31 318 525566
Fax : +31 318 540920
Internet : http://www.somatech.nl
----- Original Message -----
From: "Buzz Lightyear" <firstname.lastname@example.org>
To: "Bathsheba Grossman" <email@example.com>; <firstname.lastname@example.org>
Sent: Thursday, February 21, 2002 8:08 PM
Subject: Re: New RP System for less than $30K - limitations
> It will only do stepdowns at .012" with a .012" nozzle
> diameter. This probably wont make the best looking
> --- Bathsheba Grossman <email@example.com> wrote:
> > On Tue, 19 Feb 2002, Elaine Hunt wrote:
> > > At 10:32 AM 2/19/2002 -0500, ChathamRes@aol.com
> > wrote:
> > > >Stratasys has announced a new RP system for less
> > than $30K. Check it out
> > > >at www.dimensionprinting.com
> > >
> > > Well for once the price is heading in the right
> > direction...and for ABS at
> > > that. Looks like smart system....... Does anyone
> > have one that would care
> > > to comment about part quality and operation costs?
> > Indeed - the build envelope is a nice size. I'd
> > also like to learn
> > about the support system: hairy parts or clean
> > parts?
> > -Sheba
> > Bathsheba Grossman
> > (831) 429-8224
> > Creative prototyping
> > protoshape.com
> > Microsculpture
> > microsculpture.com
> > Bronze sculpture
> > bathsheba.com
> > For more information about the rp-ml, see
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:13:28 EET