From: thoms1991 (firstname.lastname@example.org)
Date: Wed Mar 06 2002 - 14:34:33 EET
Can you do it with polystyrene?
----- Original Message -----
From: "Blasch, Larry" <LBlasch@OPW-FC.com>
To: "RPML (E-mail)" <email@example.com>
Sent: Tuesday, March 05, 2002 1:13 PM
Subject: Stratasys Advances Rapid Prototyping Process, Increasing Model Re
> ``We've increased resolution of the model-layer thickness to 0.005 inch
> (0.127 mm). This means users can build models with much finer features --
> fine as 0.020 inch (0.508 mm) -- on a functional prototype,'' says
> project manager Jeff Hanson. ``This resolution improvement goes
> with our automated support-removal process,'' which dissolves the
> supports so they don't have to be manually removed. ``By combining
> support removal with the new resolution option, we can make models no
> process can match.''
> The technology is available exclusively on Stratasys' high-speed machine,
> the FDM Maxum.(TM) All future Maxums shipped will contain this upgrade.
> Existing Maxum users holding service contracts will receive the upgrade at
> no charge beginning in April
> For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:13:32 EET