Re: Varied Laser Power by height

From: David K. Leigh (
Date: Fri Apr 12 2002 - 16:08:39 EEST

On part parameters. . . Enter a specified laser power for a specefied height for the specified part. This is 100% manual, so if you are trying to compensate for z-growth, you have to preview and find the height.
David K. Leigh ph (254) 933-1000
Harvest Technologies, Inc. fax (254) 298-0125
Rapid Prototyping Services

  ----- Original Message -----
  From: Roger Spielman
  To: 'Brian Caulfield' ; Rapid Mailing List
  Sent: Thursday, April 11, 2002 5:33 PM
  Subject: RE: Varied Laser Power by height

  Absolutely. Step or slope of power can be programmed at will. This has been possible since the first machines.
  Roger Spielman
  Regale Inc.

  -----Original Message-----
  From: Brian Caulfield []
  Sent: Thursday, April 11, 2002 8:17 AM
  To: Rapid Mailing List
  Subject: Varied Laser Power by height

  Can the laser power parameter be varied on a SLS 2500+ by the z-height of the part?


For more information about the rp-ml, see

This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:13:41 EET