Digibot III lser scanner for sale

From: behoerner@gracocorp.com
Date: Fri May 31 2002 - 18:34:25 EEST


For information concerning setup of machine please contact Steve Koch,
founder/developer at 1-972-417-1100.

Hardware Specifications:

1) 36" diameter x 60" height work volume, 2000lb (table capacity)
static axial load, 296 ft-lbs Max static overhung load
2) The hardware configuration includes the 4-axis control board that is
installed in the system PC and all cables. NOTE: This does NOT include the
system control PC. (The PC configuration is listed below)
3) Granite and air bearing scanning system
4) Bottom granite base weight is ~1/2 ton (.450 ton)
5) Vertical column weight is ~ 700 lb

Software Specifications: The Software includes the adaptive scanning
system, the systematic scanning system, the Digibot Data Editor, the Digibot
Object Triangulator and the Digibot Data Translators which include; DXF
polyline, and polyface mesh, IGES106, STL, IBL, OBJ, VDA, DBT, XYZ, and
Imageware Surfacer data translators.

System Control PC - Not Included
        To control the Digibot III, the following minimal configuration
requirements must be met: An IBM compatible 486DX/66 or higher with Minimum
16MB memory, 200 MB hard disk, 3 button mouse, and color VGA monitor. This
is also the desired minimum configuration for the Editing software.
        NOTE: We have found that you cannot operate this system using
higher than Windows 98 OS, please contact Steve Koch, founder/developer at
1-972-417-1100 for further information.

Runs on standard 110 electrical service

Air compressor - 80 - 90 PSI, air compressor runs when scanning is being

Overall footprint of assembled Digibot III - 5' wide by 7' deep

Asking Price - $55,000 (USD), or best offer, you schedule and pay for S&H
It will be your responsibility to contact Steve Koch ( above ) to negotiate
and schedule machine setup and training.

If interested please contact:
Brian Hoerner
CAD Systems Specialist/Drafting Supervisor
Graco Children's Products
51 S. Pine St.
Elverson, PA 19520
Phone: 610-286-4659
FAX: 610-286-3014

This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.

This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.


For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/

This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:13:50 EET