Re: Change from one build style to another.

From: Pat Warner (
Date: Wed Dec 11 2002 - 19:23:25 EET

Armando, Mitxelena

It is possible, but depends on how much time you wish to spend on it.

You prepare your part as normal in LY, take the prepared part to Magics
or similar, cut the file where reqd, add the sections back to LY and
assign the styles using the original supports.

The problem is accuracy, as the different styles will all have
different amounts of shrinkage


Pat Warner
CAD/CAM Engineer
Renault F1 Limited

Tel +44 (0) 1608 678000 ext. 5152
Mobile +44 (0) 7879 848060
Fax +44 (0) 1608 678514

>>> Armando Alves <> 11/12/2002 16:02:53 >>>
Hi Mitxelena ,

it s not possible to do that , you can do with the same style
but with different layer thickness . For example :
Z=0 untill Z=10 Layer=0,1
Z=10 until Z=40 layer = 0,15
and soo on
you can not use 0,05 because that s only possible in high
resolution .
If tou have any more question contact me or Kevin Lilles ( , he works for 3D Systems and is a very
nice person , he will answer your questions.

happy to talk to you again

Armando Alves

Solidtech - Engenharia de Prototipagem Alves & Alves , LDA

Citando Mitxelena Fernandez Ibon <>:

} Hi everyone,
} Is it possible when using a stereolitography machine
} to pass from one build style to another on the same
} component? Let s say that on one surface I need high
} accuracy but the other surfaces are not so demanding in
} terms of accuracy. Could I built that surface using
} high resolution and then start bulding on quickcast?
} Besides, I guess that this would be much more
} cheeper?
} Best regards,
} Ibon Mitxelena
} Fundación INASMET Fundazioa
} Dpto. Materiales y Procesos/Material eta Prozesuen
} Departamentua
} Mikeletegi Pasealekua, 2
} Parque Tecnológico/Teknologi Parkea
} Tlf: +34 943 003700
} Fax: +34 943 003800

Faça as suas compras de Natal no Shopping do SAPO
Mais informações em


For further information on Renault F1 visit our web site at This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please destroy and notify Renault F1 on +44 1608678000."


This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:14:43 EET