Re: hardness convertion

From: Greg Pettengill (
Date: Tue Dec 24 2002 - 05:37:37 EET

or perhaps an ad for Viagra? :-)

Happy Holidays
Greg Pettengill

----- Original Message -----
From: <>
To: <>; <>;
Sent: Monday, December 23, 2002 7:13 PM
Subject: Re: hardness convertion

wow, lucky thing I decided to check these emails. For a moment I thought
someone was spamming my email with porn promos...


Original Message:
From: Jean-Marc Boéchat
Date: Mon, 23 Dec 2002 17:46:17 +0100
Subject: Re: hardness convertion

There's no way you will be able to convert Rockwell C into Shore D or A or
backwards. The three scales are basically based on the
same principle: A penetrator is forced in the material with a given load
for a certain time and the systems measures the depth of
the penetration. However the comparison ends right there.

For Rockwell C (HRC) the penetrator is a diamond cone with a tip radius of
.2 mm and an angle of 120° the load is 1471 N.

For Shore A the penetrator is a steel pin with a conical flat tip and an
angle of 35°, the load is 9.8 N whereas the Shore D has
a pointed steel pin with a 30° angle cone, a 0.1 mm tip radius and a load
of about 49 N.

To be practical, let say that HRC is fit for hard materials like quenched
and high yield steels, Shore A is used for rubber like
materials and soft polymers and Shore D is used for the more "technical"

It is the old oranges and apples story once again.

Have a nice and safe Holliday Season

J.-M. Boéchat

Rui Costa wrote:

> Hello list!
> Does anyone know where can I find a way to convert the Rocwell C hardness
scale in to the Shore D and shore A hardness scale?
> Thank you in advanced and merry Christmas to all.
> With my regards,
> Rui Costa

Jean-Marc Boéchat               email:
MIM Systems Ltd                 phone:+4126 430 08 08  fax: +4126 430 08 09
Swiss Branch office               website:
P.O. Box
CH- 1723 Marly 2
Switzerland                     "when things go wrong, don't go with them!"

Disclaimer: "I speak for myself only, it's hard enough!"

-------------------------------------------------------------------- mail2web - Check your email from the web at .

This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:14:47 EET