RE: Arcam

From: Siemer, Michael (
Date: Mon Feb 24 2003 - 21:36:01 EET

If you have questions, you can contact Ola Harrysson at NC State:

Ola L.A. Harrysson, Ph.D.
Assistant Professor
Department of Industrial Engineering
North Carolina State University
Raleigh, NC 27695-7906
Phone: 919-513-0220
Fax: 919-515-1543


Michael Siemer
Design & Engineering
Walt Disney World Co.
Ph 407.824.5265 (8.273.5265)

-----Original Message-----
From: Timothy J Gornet []
Sent: Monday, February 24, 2003 12:47 PM
Subject: Re: Arcam


There was an announcement on the RP-ML a few weeks ago that NC State
University was the first US facility to purchase an Arcam machine. I
don't know if/when it will be installed. According to the press release
at it is to be installed in the industrial engineering
department. I did a search at for Arcam and came up with no

The Pro-Metal is basically the same overall sinter/infiltrate process
as 3D's LaserForm process and similiar to Keltool - the difference is in
how you get the green part to put into the furnace/kiln for sintering
and infiltration. Pro-Metal uses 3D printing on the steel powder, SLS
LaserForm uses a laser and a polymer binder on the steel powder, Keltool
uses a pattern/cast mold to pour the metal slurry (simplification), then
they all fire/infiltrate.

Good luck,

Tim Gornet Computer Aided Engineering Consultant
SLUGNET: Vogt Bldg. Rm 101, University of Louisville, Louisville, KY
PHONENET: (502)852-0714 FAXNET: (502)852-8890
Rapid Prototyping Center

>>> parts <> 02/24/03 12:11PM >>>
Hey All,

Does anybody have any experience with parts made by Arcam?

Are there people offering these services in the US?


ProtoCall, LLC

507 West College Avenue

Waukesha, WI 53186-4501


262.896.8945 fax

414.915.0036 cell


Call about Tempered RP!

This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:17:09 EET