RE: [rp-ml] re: laser cutting

From: Evan Kirby <>
Date: Fri Jun 25 2004 - 15:23:54 EEST


Having come out of the flat stock cutting industry, I think that you have
more choices than just lasers. Waterjets work great for materials like
acrylic. I know of a waterjet job shop here in Michigan but none more local
to you. I'm sure they exist. Try this link:
Also, many of the waterjet shops also have lasers so that the two
technologies complement each other.

If you need any more info, let me know.


Evan Kirby
Technical Instructor
6111 Jackson Rd.
Ann Arbor, MI 48103
(888) 662-5057
Fax: (734) 662-7891

-----Original Message-----
From: John M. Irvin []
Sent: Wednesday, June 23, 2004 5:11 PM
To: Rapid Prototyping (RPML)
Subject: [rp-ml] re: laser cutting

- This message was manually approved by RD -

Is anyone out there cutting acrylic 1/8" thick. We need a couple of parts
quoted for cutting 500 to 1000 parts to start, then up to 3000 over the next
month. Pls e-mail or call and we can send files. If you have any questions
pls give me a call or e-mail.


John Irvin
Neco Incorporated
3901 Nome Street, Unit 8
Denver, Colorado 80239
Ph 303 574 1077
Cell 303 668 1663

write to:
"We will find a way, or we will make one"

The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
Received on Fri Jun 25 14:36:02 2004

This archive was generated by hypermail 2.1.8 : Tue Jan 12 2010 - 19:37:11 EET