RE: [rp-ml] Pro-E STL parameters

From: Bob Olsen (
Date: Tue Jul 19 2005 - 15:24:07 EEST

Pay, below works for our customers sending us Pro/E files. Regards, Bob
STL - Pro/E

1. Load desired part.

2. Select interface from PART menu.

3. Select export.

4. Select SLA.

5. If in assembly mode, select part(s) for processing.

6. Select Chord Height from SLA menu.

7. Enter .001" (.02 mm) for Chord Height value.

8. Leave Angle Control at default.

9. Select binary output.

-----Original Message-----
From: Warner, Pat []
Sent: Tuesday, July 19, 2005 4:28 AM
Subject: [rp-ml] Pro-E STL parameters

Hi List


Could anyone please give me parameters for Pro-E stl file creation?




Pat Warner

Digital Manufacturing Supervisor

Renault F1 Team





Tel +44 (0) 1608 678000 ext 5152

Mobile +44 (0) 7879848060

Fax +44 (0) 1608 678514




For further information on Renault F1 visit our web site at

WARNING: please ensure that you have adequate virus protection in place
before you open or detach any documents attached to this email.

This e-mail may constitute privileged information. If you are not the
intended recipient, you have received this confidential email and any
attachments transmitted with it in error and you must not disclose, copy,
circulate or in any other way use or rely on this information.

E-mails to and from the Renault F1 Team are monitored for operational
reasons and in accordance with lawful business practices.

The contents of this email are those of the individual and do not
necessarily represent the views of the company.

Please note that this e-mail has been created in the knowledge that Internet
e-mail is not a 100% secure communications medium. We advise that you
understand and observe this lack of security when e-mailing us.

If you have received this email in error please forward to: quoting the sender, then delete the message and
any attached documents


This archive was generated by hypermail 2.1.7 : Mon Jan 02 2006 - 08:09:15 EET