From: Stanley Lechtzin (firstname.lastname@example.org)
Date: Sun Sep 18 2005 - 01:36:44 EEST
Un-park and move the gantry over to the lowered build table. Now you
can reach under it and wipe it with a damp paper towel. Stay away
from the print heads.
The problem may be due to a damaged build table lead screw or the
lead screw motor. I hope that you have a service contract. This can
get to be very expensive.
At 02:08 PM 9/15/2005, you wrote:
>We have a 406 and see the same problem every once in a while. How do you
>clean under the carriage?
>Steve R. Pinkston
>Aerospace & Defense
>Essex Ind., Inc.
>6 Sunnen Drive
>St. Louis, MO 63143
>314-644-3000, Ext 347
>From: email@example.com [mailto:firstname.lastname@example.org] On
>Behalf Of Charles Overy
>Sent: Thursday, September 15, 2005 12:03 PM
>To: richard fletcher; email@example.com
>Subject: RE: [rp-ml] Rough Z-Corp Finish
>Have you checked under the gantry and the print head carriage. We had
>this problem with our 406 and it was because we had buildup under the
>Once we started cleaning under the carriage with each head change all is
> > -----Original Message-----
> > From: firstname.lastname@example.org [mailto:email@example.com]On
> > Behalf Of richard fletcher
> > Sent: Thursday, September 15, 2005 9:48 AM
> > To: firstname.lastname@example.org
> > Subject: [rp-ml] Rough Z-Corp Finish
> > Hi everyone
> > I am running a Z-Corp Z402 and have been getting a problem with the
> > quality of finish with the models, as well as the parts being
> > extremely weak. We are running the saturation levels as instructed,
> > but there appears to be a thin stripe of binder which is missing from
> > every sweep the print head does on every layer. We've changed the
> > print head and cleaned the contacts but it always seems to give the
> > same results. Does anyone know whether it's likely to be the print
> > head carriage and/or the ribbon cable which attaches it to the head
> > card?
> > Many thanks in advance.
> > _________________________________________________________________
> > Be the first to hear what's new at MSN - sign up to our free
> > http://www.msn.co.uk/newsletters
Prof. Stanley Lechtzin
Tyler School of Art
7725 Penrose Ave.
Elkins Park, PA 19027
M/J/C-C web site
Online CAD/CAM I Course
This archive was generated by hypermail 2.1.7 : Mon Jan 02 2006 - 08:09:21 EET