From: Ian Gibson (firstname.lastname@example.org)
Date: Thu Dec 13 2007 - 07:04:55 EET
Containers of adhesive? That sounds interesting. If that means they
selectively print the adhesive then that would make the decubing
process much easier. This was probably one of the worst things about
LOM and Kira. If the waste material wasn't glued in the first place,
it would be a lot easier to separate.
Kira used to have a laser printer to apply the adhesive toner to the
paper and a plotter system that carried a blade cutter. Now if
plotter also carried a glue pen as well as the blade, they could
dispense with the printer and use a simple roller rather than a
heated one. That could make for a very low cost approach.
At 08:18 PM 12/12/2007, you wrote:
>It uses a blade and containers of adhesive. The paper (layer)
>thickness is 0.1 mm (0.004 inch).
>----- Original Message -----
>From: <mailto:email@example.com>Ian Gibson
>Sent: Tuesday, December 11, 2007 9:12 PM
>Subject: Re: [rp-ml] New RP Device
>Do you know if it is laser cutting or another method (blade)?
>At 05:05 AM 12/12/2007, you wrote:
>>The Mcor Matrix machine sells for EUR 18,900. Annual maintance is EUR 1,500.
>>Wohlers Associates, Inc.
>>OakRidge Business Park
>>1511 River Oak Drive
>>Fort Collins, Colorado 80525 USA
>>----- Original Message -----
>>From: <mailto:ListMail@fabbers.com>Marshall Burns
>>To: <mailto:firstname.lastname@example.org>'Robert Jaquiss' ;
>>Sent: Tuesday, December 11, 2007 9:08 AM
>>Subject: RE: [rp-ml] New RP Device
>>Very nice. Does anybody know the machine and operating costs?
>>PS, I still have George Sachs' "Just wondering where everybody has
>>gone" e-mail in my inbox waiting for me to write a reply. It's an
>>From: <mailto:email@example.com>firstname.lastname@example.org [
>>mailto:email@example.com] On Behalf Of Robert Jaquiss
>>Sent: Tuesday, December 11, 2007 06:51
>>Subject: [rp-ml] New RP Device
>> This morning, I received a note about a company Mcor
>> Technologies in Ireland that has a new RP machine using LOM to
>> fabricate models from A4 office paper. The build volume is
>> 297X250X150MM. The web site is:
>>Have a great day.
>>230 Peach Tree Drive
>>West Monroe, Louisiana 71291-8653
>>Phone: (318) 396-1853
>> I have no financial interest in Mcor Technologies.
>Associate Professor Ian Gibson
>Department of Mechanical Engineering
>National University of Singapore
>Tel: +65 92777343
>Don't look around to find the sound that's right beneath your feet
Associate Professor Ian Gibson
Department of Mechanical Engineering
National University of Singapore
Tel: +65 92777343
Don't look around to find the sound that's right beneath your feet
This archive was generated by hypermail 2.1.7 : Tue Jan 01 2008 - 18:13:10 EET