Re: [rp-ml] Stratasys Waterworks support system removal

From: Joe Kerer <>
Date: Mon Feb 02 2009 - 17:12:25 EET

Hi Don,
360MC - a repackaged Vantage, which was a repackaged Titan
All that matters is heat and agitation. You could go to one of the SSYS recommended suppliers and spend anywhere between $5,000 and $12,000. Nice, but way overkill.
All you need is a stainless steel bayonet heater, a pump which can handle the caustic solution, and a tank.  Heater $125, Pump $160, tank $50.
I have heard of some getting away with just the heater and tank.

--- On Mon, 2/2/09, Donald Erich <> wrote:

From: Donald Erich <>
Subject: [rp-ml] Stratasys Waterworks support system removal
Date: Monday, February 2, 2009, 4:56 AM

Hi all,
I apologize if this came to you twice, but I haven’t received it in my in box so can only presume that the initial try was unsuccessful.
The Clemson Engineering Technologies Laboratory has recently purchased a Stratasys 360mc with the large build volume upgrade (16 x 14 x 16”) and we are now looking to add a support removal system for the Waterworks support.  I would be very interested in learning what those of you who are using similar technology are using to remove the support system, and what you think of it. 
Thanks in advance for your input,
Don Erich
Donald L. Erich
100 Technology Drive
Anderson, SC  29625

864-646-2413 x207
864-656-7310 (FAX)
678-469-2385 (Cell)
visit us on the web at
Received on Mon Feb 02 17:17:36 2009

This archive was generated by hypermail 2.1.8 : Thu Jan 07 2010 - 08:26:36 EET