Re: [rp-ml] Thickness of laser printer output on clear plastic sheet

From: Carl Fruth <>
Date: Mon Sep 21 2009 - 18:34:35 EEST

Hash: SHA1

Hi Doug and all,

that is a difficult question. Depending on the printer engine you can
expect something like 1 µm to 2 µm and a density of 50%.
At Sintermask we developed a new printer system to produce masks for our
SMS (selective mask sintering) process to have a good density.

Charly Fruth

Sintermask GmbH schrieb:
> We have been looking for a reference document that provides the
> thickness of a laser printer output on a clear transparency sheet. We
> are interested in both black and color.
> Anyone on the list know what this nominal thickness is?
> Doug
Version: GnuPG v1.4.7 (MingW32)


Mit den besten Grüssen / Best regards
Dipl.-Ing. Carl Fruth
FIT - Fruth Innovative Technologien GmbH
Gewerbegebiet Lupburg
Eichenbühl 10
DE-92331 Parsberg
Telefon: +49 9492 9429 - 0
Telefax: +49 9492 9429 - 11
Geschäftsführer: Dipl.-Ing. Carl Fruth
HRB 13273 Amtsgericht Nürnberg
USt-ID-Nr.: DE 173 159 995
Steuer-Nr.: 11/201/126/50106/57
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen.
Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich
erhalten haben, informieren Sie bitte sofort den Absender oder
und vernichten Sie diese E-Mail. Das unerlaubte Kopieren, sowie die unerlaubte
Weitergabe dieser E-Mail ist nicht gestattet.
This e-mail may contain confidential and/or privileged information. If you are
not the intended recipient (or have received this e-mail in error) please
notify the sender or immediately and destroy this e-mail. Any
unauthorised copying, disclosure or distribution of the material in this e-mail
is strictly forbidden.
Received on Mon Sep 21 18:28:46 2009

This archive was generated by hypermail 2.1.8 : Thu Jan 07 2010 - 08:26:36 EET