Am Freitag den, 26. Oktober 2001, um 17:32, schrieb Candi Majewski:
> Hi,
>
> Does anyone know of any work being/been done regarding making
> RP parts with inserts in them?
With an SLA, you can do it by building parts without using the sweeper.
Of course, you have to take some care your inserts don't block
(shadow) the laser from curing essential areas of your part. The
insert itsself probably won't be damaged, at least in an SLA250
as the laser power is only somewhere between 10 mW and 70 mW.
Then, for bigger parts, calculate up to 15 minutes of recoating
time per layer.
Markus Hitter
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. Markus Hitter
http://www.jump-ing.de/
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Fri Jan 04 2002 - 09:58:03 EET